Publicidad
Idiomas disponibles
Idiomas disponibles
English
￭ If potable water has passed through the backflow
preventer, it can no longer be regarded as potable water.
To prevent contamination of potable water:
– Follow the rules issued by the local water authority
to prevent water flowing back from the pressure
washer into the drinking water main.
– Do not use the pressure washer with dirty water (i.e.,
water that contains sand, dirt or other particulate
matter). If there is a risk that the water supply is dirty,
use an appropriate water filter or find an alternative
water source.
5.9
Using the Pressure Washer
5.9.1
Before Operation
WARNING
￭ Misuse or unauthorized use may result in personal injury
and property damage.
– Use the pressure washer only as described in this
instruction manual.
￭ Using a pressure washer that is modified, damaged,
improperly adjusted or maintained, or not completely and
securely assembled can lead to a malfunction and
increase the risk of serious personal injury or death.
– Never operate a pressure washer that is modified,
damaged, improperly maintained or not completely
and securely assembled.
– Always check your pressure washer for proper
condition and operation before starting work,
particularly the spray gun trigger and retaining latch.
– Ensure that the spray gun trigger and retaining latch
move freely. The spray gun trigger must not engage
until the retaining latch is moved to the unlocked
position.
– Never attempt to modify or override the controls or
safety devices in any way.
12
5 IMPORTANT SAFETY INSTRUCTIONS
– If your pressure washer or any part is damaged or
does not function properly, take it to your authorized
STIHL servicing dealer. Do not use the pressure
washer until the problem has been corrected.
￭ Before connecting the pressure washer to the power
supply:
– Read and follow the instructions on switching on the
pressure washer, @ 11.1.
– Ensure that the high-pressure hose is in good
condition and not frayed, cracked, deformed or
damaged in any way. Never operate the machine
with a damaged or worn high-pressure hose.
￭ To help reduce the risk of serious personal injury or death
from unintentional starting:
– Never carry the pressure washer with your finger on
the spray gun trigger.
– Switch off the pressure washer, relieve system
pressure, lock the spray gun trigger and disconnect
from the power supply before assembling,
inspecting, cleaning, maintaining or servicing the
pressure washer.
– Always switch off the pressure washer, relieve
system pressure and lock the spay gun trigger
before attempting to remove the high pressure hose
or spray lance from the spray gun.
– Always switch off the pressure washer, relieve
system pressure and lock the spray gun trigger
before attempting to adjust or change a spray nozzle
or other accessory.
– Never leave the pressure washer unattended when
it is connected to the power supply.
0458-004-8621-A
Publicidad
