Stihl RE 100 PLUS CONTROL Manual De Instrucciones página 22

English
2
1
► Press the spray lance (1) against the spray gun (2) and
pull out the spray lance.
2
► Press down and hold the locking lever (1).
► Pull out the high-pressure hose (2).
8.5 Inserting and Removing the Spray Nozzle
8.5.1 Inserting the 3-in-1 Nozzle
WARNING
To reduce the risk of severe injury from unintended
spraying, switch off the pressure washer, relieve system
pressure and lock the spray gun trigger before attempting to
adjust or change a spray nozzle or other accessory.
20
1
WARNING
If the nozzle is not secure, it can fly out of the spray lance
during operation and cause injury. Confirm that the nozzle is
fixed securely in the quick-connect coupling.
To insert the 3-in-1 nozzle:
► Switch off the pressure washer, @ 11.2.
► Pull the spray gun trigger to relieve pressure.
► Lock the spray gun trigger.
► Remove all sand and debris from the connections and
couplings.
2
► Attach the 3-in-1 nozzle (1) to the spray lance (2).
► Push the 3-in-1 nozzle as far as it will go into the spray
lance.
► Once inserted, turn the 3-in-1 nozzle clockwise until it
engages.
► If the 3-in-1 nozzle is difficult to insert into the spray lance,
apply a food-safe fitting grease to the sealing surface on
spray lance.
8.5.2 Removing the 3-in-1 Nozzle
WARNING
To reduce the risk of severe injury from unintended
spraying, switch off the pressure washer, relieve system
pressure and lock the spray gun trigger before attempting to
adjust or change a spray nozzle or other accessory.
8 Assembling the Pressure Washer
1
0458-004-8621-A