Publicidad
Idiomas disponibles
Idiomas disponibles
Install Pull Chain
Install the pull chain extension chain and fob
(Figure 13).
Reverse
switch
Fob
Speed settings for warm or cool weather
depend on factors such as room size, ceiling
height, number of fans, and so on.
The fan shipped from the factory with the
reverse switch positioned to circulate air
downward. If airflow is desired in the opposite
direction, turn your fan off and wait for the
blades to stop turning, then slide the reverse
switch (located on the switch housing, refer to
figure 13) to opposite position, and turn fan on
again. The fan blades will turn in the opposite
direction and reverse airflow.
Warm weather - (Forward) A downward
air flow creates a cooling effect as shown
in Figure 14. This allows you to set your
Figure 13
air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward air flow
moves warm air off the ceiling are as shown in
Figure 15. This allows you to set your heating
unit on a lower setting without affecting your
comfort.
8. Operating Your Fan
Figure 14
Figure 15
Publicidad
