Publicidad
Idiomas disponibles
Idiomas disponibles
CHARGER
Model
59129
BATTERY
59128
WARNING: Before attempting to use any tool, make sure your are familiar with all
operating features and safety requirements.
INSTALLING OR REMOVING BATTERY PACK
1. Hold the tool and the battery pack firmly when installing or removing battery pack. Failure to
hold the tool and the battery pack firmly may cause them to slip off your hands and result in
damage to the tool and battery pack and a personal injury.
2. Always switch off the tool before installing or removing of the battery pack
3. To remove battery pack, press the battery clip, and pull out. To install the battery pack, align
the tongue on the battery pack with the groove in the housing and slip it into place. Always
insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of
the tool, causing injury to you or someone around you. (Fig. 1)
Input
100V~240V, 50-60Hz, 80W
5.0Ah
OPERATION
Charging voltage
20V
A. Keyless Chuck
B. Torque Control
C. LED Light
D. Trigger
E. Forward/Reverse Lever
F. 2-Speed Lever
G. Auxiliary Handle
H. Action Mode Changing
Ring
I. LCD Display
J. RPM Button "+"
K. RPM Button "-"
L. LED Light Button
M. Belt Hook
N. Battery Pack
O. Battery Clip
P. Charger
27
Publicidad
