Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
1. Place switch in OFF position and remove the battery before the appliance is serviced,
cleaned, or maintenance is performed.
2. Check if device loose, parts damaged such.
3. Please storage locked tools in dry location where the children cannot touch when you didn't
use tool.
4. Only use recommended spare parts and accessories from manufacturer for replacement.
5. Before and after using, check and maintain tools regularly. Fix tool via our authorized center.
6. Keep hands dry, clean and no greasiness and lubricant.
7. Please don't install battery pack into tool when storage.
WARNING: Always wear safety goggles or safety glasses with side shields when
operating tool. Failure to do so could result in objects being thrown into your eyes, resulting in
possible serious injury.
WARNING: Read all instructions Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings
listed below refers to your mains-operated (corded) power tool or battery-operated (cord- less)
power tool.
FAULT STATU
38
TROUBLESHOOTING
CAUSE
Low voltage when the motor starts.
Low voltage when the motor starts.
Overvoltage when the motor starts.
When the motor starts, the battery
is over heat.
Battery over heat when the motor is
running.
Motor overcurrent.
Battery low temperature or
temperature detector disconnected.
MOS over heat when the motor
starts.
MOS over heat when the motor
starts.
MOS low temperature or
temperature detector disconnected.
When the motor is running, the
control IC detects an abnormality.
MEASURE
Check the battery indicator. Please
charge if there is insufficient power.
Check the battery indicator. Please
charge if there is insufficient power.
Check the battery indicator. Charge
if there is insufficient power.
Replace the battery and let the
battery cool down.
Replace the battery and let the
battery cool down.
Replace the battery and restart.
Please send it to your local
authorized service center for repair.
Restart after cooling down.
Restart after cooling down.
Please send it to your local
authorized service center for repair.
If the restart is still abnormal,
please send it to your local
authorized service center for repair.
Publicidad
