Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Do not use force when installing the battery pack. If the cartridge does not slide in
easily, it is not being inserted correctly.
CHARGING THE BATTERY PACK
Fig.2
1. The battery pack for this tool is supplied in a low charge condition to prevent possible
problems, there- fore, you have to charge the battery before first use.
2. Charge battery pack only with the charger provided.
3. Using an other charger can cause severe damage or even cause battery to explode from the
work piece and determine the reason for jamming.
4. Connect the charger to a power outlet. Place the battery pack in the charger aligning raised
rib on the battery pack with the groove in the charger. (Fig. 2)
NOTE:
-
Lithium battery does not have memory effect, there-fore to prolong the battery life
please fully charged the battery before storage. This will reduce battery self discharging
characteristics. If the voltage of the battery is too low, it'll automatically lock itself. If the tool
feels lack of power, please stop the operation and charge the battery immediately. If the
battery is stored more than 3 months, please charge the battery first before operation.
-
If the tool does not function, please clear all debris and restart again. If malfunction
continues malfunctions, please remove the battery immediately and contact the local service
dealers for assistance.
-
The battery pack will become slightly warmer while charging. This is normal and does not
indicate a problem.
-
Do not place charger in an environment either extreme hot or cold. It will work best at normal
room temperature.
-
When the battery is fully-charged, unplug your char- ger from the power supply and remove
the battery pack from the charger.
28
Cracked
DANGER:
If battery pack case is cracked or damaged, do not insert into
charger. Danger of electric shock orelectrocution.
Fig.1
Publicidad
