Publicidad
Idiomas disponibles
Idiomas disponibles
PRECAUTIONS ON USING YOUR CORDLESS TOOL
This product contains Lithium Ion batteries which must be disposed of properly.
1. Be aware that this tool is always in an operating condition, because it does not have to be
plugged into an electrical outlet.
2. Fully charge the battery for better operation.
3. Be sure the battery is snapped in place.
4. When not in use, lock the switch.
5. When operating at a high place, be aware of things below and around you.
6. This unit features the overload protection design. When the unit overload or stall, the power
would be cut-off automatically. This will protect the motor, switch and battery.
7. This unit features a battery temperature detective sensor. If the battery exceeds the safety
working temperature, the unit would shut-off automatically. Once the temperature dropped
back to the safe temperature zone, the unit would function normally again.
8. This unit features a battery over-discharge protection system which can prolong the battery's
lifespan.
WARNING: Before attempting to use any tool, make sure your are familiar with all operating
features and safety requirements.
INSTALLING OR REMOVING BATTERY PACK
1. Hold the tool and the battery pack firmly when installing or removing battery pack. Failure to
hold the tool and the battery pack firmly may cause them to slip off your hands and result in
damage to the tool and battery pack and a personal injury.
OPERATION INFORMATION
A
B
C
D
E
F
G
H
I
J
Anvil
LED Light
Trigger
Forward/Reverse lever
4 Stage Impact Power Selection and
Battery Capacity Indicator Light
4 Stage impact power selection button
Belt Hook
Battery Clip
Battery Pack
Charger
23
Publicidad
