WARNING: Always be sure that the tool is switched off and battery is removed before
attempting to perform inspection or maintenance on the tool. Failure to switch off and
remove the battery may result in serious personal injury from accidental start-up.
CLEANING
Remove the battery.
1. Keep the air vents free of obstructions. Do not spray, wash, or immerse the air vents in
water.
2. Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong
solvents or detergents on the plastic housing or plastic components. Certain household
cleaners may cause damage, and may cause a shock hazard.
MAINTENANCE
1. Place switch in OFF position and remove the battery before the appliance is serviced,
cleaned, or maintenance is performed.
2. Check if device loose, parts damaged such.
3. Please storage locked tools in dry location where the children cannot touch when you didn't
use tool.
4. Only use recommended spare parts and accessories from manufacturer for replacement.
5. Before and after using, check and maintain tools regularly. Fix tool via our authorized center.
6. Keep hands dry, clean and no greasiness and lubricant.
7. Please don't install battery pack into tool when storage.
WARNING: Always wear safety goggles or safety glasses with side shields when
operating tool. Failure to do so could result in objects being thrown into your eyes,
resulting in possible serious injury.
WARNING: Read all instructions Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
30
MAINTENANCE INFORMATION