Technical Data; Safety Information - brennenstuhl JARO 13000 Manual De Instrucciones

Operating Instructions
D
LED Light
JARO 13000
Note: Before use of the floodlight, please carefully read the operating instructions and store them
at a proper location!

TECHNICAL DATA

Protection type: IP 65
Nominal voltage: 220 – 240 V~ 50/60 Hz
Power factor: > 0.9
Dimensions: 414 x 71 x 341 mm
Weight: 4.4 kg
This high-power LED floodlight is suitable for indoor and outdoor lighting purposes and for fixed
assembly.
The floodlight must not be used for other purposes.

SAFETY INFORMATION

1. The floodlight must be installed and maintained by a qualified specialist.
2. Electric installations may only be completed in compliance with the safety regulations
(VDE 0100 for Germany).
3. For the connection, a VDE-certified connection line (at least H05RN-F 3G1,0) must be used.
4. The floodlight must be grounded properly.
5. The floodlight must not be used without properly attached sealing rings!
6. LED floodlights are extremely bright. Please never look directly into the light.
7. If the protective cover is broken, it should be replaced with an original Brennenstuhl
protective cover before further use of the floodlight.
8. If the mains connection line for the floodlight or the connection box is damaged, it must be
replaced by a qualified specialist to avoid any risk.
9. Hot surface at ≥ 100 W versions.
INSTALLATION AND CONNECTION TO POWER SUPPLY
see figures p. 3
Mounting position: The spotlight should be ideally fixed with the wall bracket. It must be
installed at a height less than 3 m
The light can be tilted by 90° downwards and by 45° upwards
6
18P150 LED Strahler Jaro 13000 0499085 190312.indd 6
Protection class:
Electrical Power:
Current max.:
Protective cover dimensions: 353 x 253 x 5 mm
max. projected area:
.
I
150 W
0.8 A
0.14 m²
.
12.03.2019 10:39:31