Cameo ZENIT W600 Manual De Usuario página 18

COLOR MACROS (Color Macro)
15 different preset color macros are available. Select color macro mode as per the procedure
previously described in SETTING OPERATION MODE and confirm with ENTER. Now use UP and
DOWN to select the desired color preset (observe arrow) and confirm with ENTER (Color Off =
blackout). A three-digit figure is shown on the display, and you can set the desired brightness on a
scale from 000 to 100 using UP and DOWN. Confirm by pressing ENTER. Press MODE three times
to return to the main display (Color Macro Mode).
----------- Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
STATIC MODE (STATIC)
The static mode allows the functions Dimmer, Strobe, R, G, B, W and Color Temp to be adjusted
directly on the device with values between 000 and 255, in a similar way to a DMX controller. In
this way, an individual scene can be created without the need for an additional DMX controller.
Select static mode as per the procedure previously described in SETTING OPERATION MODE and
confirm with ENTER. Now use UP and DOWN to select the menu item you wish to edit (observe
arrow) and confirm with ENTER. The display will now show a three-digit number field, and you
can use UP and DOWN to configure the desired value between 000 and 255. Confirm by pressing
ENTER. Press MODE three times to return to the main display (Static Mode).
----------- Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
18
------------ Color Macro ------------
Color Off
Red <100>
Amber <100>
Yellow Warm <100>
Yellow <100>
Green <100>
Turquoise <100>
Cyan <100>
---------------- Static ----------------
Dimmer <255>
Strobe <255>
Red <255>
Green <255>
Blue <255>
White <255>
Blue <100>
Lavender <100>
Mauve <100>
Magenta <100>
Pink <100>
Warm White <100>
White <100>
Cold White <100>
000
-
Mode
Static
255
001
-
Mode
Color Macro
100