Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an in-
tegral component of the product. Therefore, please store them and
the packaging carefully in case questions arise in the future. Plea-
se always include these instructions when handing on the product
to a third party. This product must be assembled by an adult. This
product is designed for private / domestic use only. This product is
not designed for commercial / industrial use. The use of the product
requires specific skills and knowledge to be able to avoid injuries due
to crashes and collisions. Always adjust according to the age of the
user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
HUDORA Little BigWheel
Item number: 14201, 14202, 14203, 14204, 14206, 14207, 14211
Dimensions: approx. 75 cm in length, deck approx. 25 x 11.2 cm
Class:
A, 100 kg maximum user weight
Purpose:
Leisure scooter for use on public areas, no toy.
If you have assembly problems or would like further information on
the product, we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Scooter | 1 x These instructions
Other parts which may be included with the delivery in some circum-
stances are not required.
SAFETY INSTRUCTIONS
• Wear suitable protective clothing for your own safety. Wear per-
sonal protective equipment. This includes at least: hand / wrist
guards, knee pads, head protection and elbow pads. Never use
the scooter without shoes!
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e. tho-
se which are flat, clean, dry, and use the scooter where possible
away from other road users. Avoid sloping ground. The brakes
may become hot if the scooter has been used for a while! Your
footwear could be damaged! The brakes shouldn't be touched un-
til they have cooled down.
• Always be considerate of others.
• Before you begin – Ensure that all fasteners and locking parts are
intact and tight, e.g. the folding mechanism and the height setting
of the handlebar. The functions of self-securing screw threads can
be impaired after repeated loosening and tightening of the con-
necting elements. Check especially for the correct alignment and
fastening of the steering set-up.
• Do not use the scooter at twilight, at night or in poor visibility. Do
not use it on roads or thorough-fares or on slopes or hills. Avoid
being in the proximity of stairs and open water.
• The scooter is not suitable for jumps.
• Prior to using the scooter, please inform yourself about restricting
applicable traffic regulations for the intended area of application.
• The use of the product requires specific skills and knowledge to
be able to avoid injuries due to crashes and collisions.
• Children should only use the product when they are under adult
supervision.
(Wheel size: 178/125 mm)
®
• Ensure when riding that the logo on the handlebar points to the
front or else that the push buttons is as such oriented backwards.
INSTRUCTIONS ON ASSEMBLY
No tools are required to assemble the product. The scooter is deliver-
ed in its transport form (folded)! (Picture 1)
PLEASE PROCEED AS FOLLOWS TO
GET THE SCOOTER READY FOR USE
• Pull on the lever to the right above the running board to loosen the
transportation lock (Picture 2)
• Unfold the scooter's handlebars upwards.
• Now push the folding hinge towards the handlebar stem until you
hear it click into place. (Picture 3)
• Insert the handlebar grips into the T-section of the handlebar
stem. Use your thumbs to press down both locking buttons until
the the grips can be easily pushed into the T-section. Turn the
handlebar grips until the locking buttons are positioned in the two
openings intended for them and you hear them click into place.
Check that both handlebar grips are fitted correctly by pulling both
outwards. If they do not move, they have been assembled in ac-
cordance with the instructions. (Picture 4)
• Loosen the quick release lock on the handlebar rod by pushing
the lever of the quick release lock until the lever is parallel to the
handlebar grip. (Picture 5)
• The handlebars can be locked into place at 2 different heights. Pull
the handlebar rod out of the handlebar stem until it is at the re-
quired height and the relevant button has snapped into place. The
maximum height cannot be exceeded due to the integrated lock.
If the handlebar does not sit firmly at the required height, open
the quick release lock again and turn it a few times so that the
fastening bracket fits more tightly to the handlebar rod. Repeat this
process until the handlebar rod can be aligned securely. (Picture 6)
• Now close the quick release lock by pushing the lever down to the
handlebar stem.
• Always check all parts before use to ensure they are fitting tightly,
particularly the folding mechanism, the handlebar locking and the
wheels.
TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,
PLEASE CARRY OUT THE FOLLOWING ACTIONS
• Loosen the quick release lock by pushing the lever of the quick
release lock away from the handlebar stem.
• Please press the locking button so that the handlebar rod can be
moved. (Picture 7)
• Push the handlebar rod as far as it will go into the handlebar stem.
• Close the quick release lock by pushing the lever down to the
handlebar stem.
• Use your thumbs to press both locking buttons in the handlebar
grips and pull the handlebar grips outwards until they are released
completely from the T-section. (Picture 4)
• Push the handlebar grips down until they are parallel with the
handlebar shaft.
• Pull the lever (to the right above the running board) in order to
loosen the assembly lock. (Picture 2)
• Fold up the scooter by moving the handlebar rod towards the back
wheel until you hear the transport lock click into place.
6/24
Publicidad
