Stihl TSA 230 Manual De Instrucciones página 46

English
and tailored precisely to the respective intended
use as well as the engine performance of the
cut-off machine.
They are of consistently outstanding quality.
6.1 Transport and storage
– Do not expose cutting wheels to direct sun‐
shine or other thermal stresses during trans‐
port and storage
– Avoid jolting and impacts
– Stack cutting wheels flat on a level surface in
the original packaging in a dry place where the
temperature is as constant as possible
– Do not store cutting wheels in the vicinity of
aggressive fluids
– Store cutting wheels in a frost-free place
7 Composite Abrasive
Wheels
Composite resin abrasive wheels are also known
as bound abrasive wheels.
Types:
– for dry applications
– for wet applications
The proper selection and use of composite resin
abrasive wheels ensures economical use and
avoids accelerated wear. The product code
which appears on the label should help.
STIHL composite resin abrasive wheels are suit‐
able, depending on the version, for cutting the
following materials:
– Stone
– Ductile cast iron pipes
– Steel; STIHL composite resin abrasive wheels
are not suitable for cutting railway tracks
– Stainless steel
Do not cut any other materials – Risk of accident!
46
7 Composite Abrasive Wheels
8 Diamond Abrasive Wheels
For wet applications.
The proper selection and use of diamond abra‐
sive wheels ensures economical use and avoids
accelerated wear. The product code which
appears
– on the label and
– on the packaging (table with recommendations
for use) is an aid to selection
STIHL diamond abrasive wheels are suitable,
depending on the version, for cutting the follo‐
wing materials:
– Asphalt
– Concrete
– Stone (hard stone)
– Abrasive concrete
– Fresh concrete
– Clay brick
– Clay pipe
Do not cut any other materials – Risk of accident!
Never use diamond abrasive wheels with side
plating as they jam in the cut and can result in
extreme kickback – Risk of accident!
8.1 Product Codes
The product code is a combination of letters and
numbers, consisting of up to four characters:
– the letters denote the main field of application
of the abrasive wheel
0458-707-9821-C