bort medical X-Walker Achillo Manual De Instrucciones página 10

EN
valve and re-attach the valve cover. You should now feel a surface stabilisation in the lower leg and foot
region. If necessary, re-tighten the fastening straps again.
Tip: To ensure a good fit, we recommend that you pay attention to even distribution of the filling, which
consists of a large number of small balls. By fluffing up the padding liner before putting the brace on or
smoothing out the filling with your hand, you can achieve even distribution of the filling and optimise its fit.
Accessories available:
REF 100 370 Understocking
REF 100 380 Protective cover against wetness
REF 100 390 Protective cover for night-time
REF 990 175 Heel wedge set for X-Walker Achillo
Removal
6
To remove the aid, take the valve cover off and reduce the vacuum by pressing the blue button on
the inside of the valve. You hear the air flowing into the liner. Then, open the harnesses and the
liner, remove the front cover and the brace from the leg.
Tip: Close all the Velcro fasteners in order to avoid damaging other items, e.g. to further clothing.
Material composition
35% polyester (PES), 35% cotton (CO), 30% PUR foam (PUR)
Cleaning information
Hand-washing
Do not clean chemically
Hand wash the Walker and the liner with lukewarm water and mild detergents. Close the Velcro fasteners
in order to avoid damages, e.g. to items of clothing. Air dry it and avoid heat.
Before cleaning the liner, ensure that the valve cap is screwed on.
Guarantee
The legal regulations of the country in which you acquired the product apply to the purchased product.
Please contact your specialist retailer if you suspect a warranty claim. Please clean the product before
submitting a warranty claim. If the enclosed instructions for use have not been properly observed, the
warranty may be impaired or cancelled. The warranty does not cover use of the product inappropriate for
the indication, non-observance of application risks, instructions and unauthorised modifications to the
product.
Useful life/Lifetime of the product
The lifetime of the medical device is determined by its natural wear and tear if treated appropriately and as
recommended.
10
Do not bleach Do not dry in a tumble dryer Do not iron