EINHELL RG-PM 48 B&S Manual De Instrucciones Original página 22

Anleitung_RG_PM_48_B_S_SPK7:_
GB
3. Proper operation
The petrol lawn mower is intended for private use i.e.
for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of 50
hours, during which time the machine is primarily
used to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting halls,
and agricultural/forestry applications are excluded.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The operating instructions as supplied by the
manufacturer must be kept and referred to in order to
ensure that the lawn mower is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and servicing
conditions.
Important! Due to the high risk of bodily injury to the
user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vegetation,
planted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up tree or
hedge clippings. Moreover, the lawn mower may not
be used as a power cultivator to level out high areas
such as molehills.
For safety reasons, the lawn mower may not be used
as a drive unit for other work tools or toolkits of any
kind.
4. Technical data
Engine type:
Single cylinder four-stroke engine, 158 ccm
Working speed:
Fuel:
Tank capacity:
Engine oil:
Spark plug:
Electrode spacing:
Cutting height adjustment:
Cutting width:
22
27.08.2009 14:33 Uhr
L sound pressure level:
pA
L sound power level:
WA
Vibration a
Weight:
5. Before starting the equipment
5.1 Assembling the components
Some parts of the mower come disassembled. For
quick and easy assembly, read and follow the
instructions below.
Important! You will need the following additional
tools (not supplied) for assembly, and also for
maintenance work:
A flat oil drip tray (for changing the oil)
A 1 liter measuring jug (oil/petrol resistant)
A petrol can (5 liters is sufficient for approx. 6
operating hours)
A funnel (suitable for the tank's petrol filler neck)
Household wipes (to wipe up oil/petrol residue;
dispose of these at a filling station)
A petrol suction pump (plastic, available from
DIY stores)
An oil can with hand pump (available from DIY
stores)
1 liter of engine oil (10W30)
Assembly
1. Take the mower and attachment parts out of the
packaging and check that all parts are present
(Fig. 2).
2. Affix the lower push bar (Fig. 3a/Item 5) to the
mower housing and set the desired working
height. 3 different working heights are available.
Each peg on the lower push bar can be inserted
into a hole situated directly opposite to it, on the
mower housing, for example A-A (Fig. 3). The
lower push bar must be equally adjusted on both
sides. Now affix the cover (Fig. 3a/Item 21) and
attach the push bar (5) using the square head
screws (15) and the star screws (18) as shown in
2800 min -1
Figure 3a.
3. Fasten the top push bar to the bottom push bar
standard petrol
using a screw (Fig. 3b/Item 16) and a star screw
approx. 0.8 l
(Fig. 3b/Item 18) on each side. Make sure that the
approx. 0.59 l / 10W30 lobes of the screws are folded towards the inside
so that the high speed clamping function remains
RJ19LM
operational.
0.76 mm
4. Insert the grip of the starter cord (Fig. 3c/Item 4)
into the hook provided for that purpose (Fig.
central, (30-75 mm)
3c/Item 24) as shown in Figure 3c.
480 mm
5. Fasten the cords to the push bar with the
Seite 22
85,6 dB(A)
hw
96 dB(A)
6,1 m/s 2
35 kg