STAMOS S-MIG 350H Manual De Instrucciones página 15

CAUTION! The figures in this manual are illustrative only and may vary in some details
from the actual appearance of the product.
2. Technical data
Product name
Product model
Nominal input voltage [V] /
Frequency [Hz]
Type of welding
Welding current range [A]
Idle voltage [V].
Rated duty cycle [%]
Welding current in 100%
duty cycle [A]
Welding current in 60% duty
cycle [A]
Wire diameter [mm]
Hot start
Cooling
Insulation class
Degree of protection of the
housing
Ambient temperature during
operation [°C]
Dimensions [mm]
Weight [kg]
3. General Description
The manual is intended to assist in safe and reliable use. The product is designed and manufactured
strictly according to technical specifications using the latest technology and components and
maintaining the highest quality standards.
To ensure the long and reliable operation of the device, make sure to operate and maintain it properly
in accordance with the guidelines in this instruction manual. The technical data and specifications in
this manual are up-to-date. The manufacturer reserves the right to make changes in order to improve
the quality. Taking the technical progress and the possibility of reducing noise into account, the unit is
designed and built in such a way that risks resulting from noise emissions are reduced to the lowest
possible level.
4. Safety of use
CAUTION! Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury or death.
The term "device" or "product" in the warnings and the description of the instructions refers to
CAREFULLY READ AND UNDERSTAND THIS MANUAL
BEFORE STARTING THE WORK.
MIG MAG welding machine
S-MIG 350H
400~/ 50
MIG / MAG | MMA
40-350 (MIG)
20-350 (MMA)
65 - MIG / MAG | MMA
60
250 (MIG)
250 (MMA)
350 (MIG)
350 (MMA)
Ø 0.8 - 1.2
YES
Fan
F
IP21S
-20 ~ 40
560x450x330
46.9