5.3.2. Gas connection
Place the gas cylinders away from the object to be welded and secure them against falling.
•
•
The gas connection of the welding machine must be connected to the gas cylinder or to the
gas supply system with a suitable hose and a regulator with a gas flow control. Caution! It is
not allowed to use network regulators for gas cylinders and vice versa. Such interchange
may result in reducer damage and personal injury.
Economical use of gas prolongs the welding time.
•
6. Product overview
1 - MIG / MAG welding machine
2 - MIG / MAG welding holder with cable
3 - ground cable with clamp
4 - wire feeder
Welding machine control panel: