Cameo EVOS W3 Manual De Usuario página 17

Rotate the encoder to select, press the encoder to confirm, rotate to change value or status, press to confirm. Return with

Run Scene Starts the scene
Record Scene Records the scene from an external controller
(activate DMX, W-DMX, Art-Net, or sACN mode, configure
the desired setting in the corresponding controller, select
the desired scene, and confirm)
Edit Scene Edits the scene (see table Edit Scene)
Master/Alone Sends scene as control signal to a slave unit via XLR,
wireless, or XLR and wireless
Sends scene as control signal (Stand Alone No)
Does not send scene as control signal (Stand Alone Yes)
Copy to Slave Transmits scenes 1 to 8 to one or more slave units via
XLR cable (same model, same software version). Executes
operation by selecting Yes. The scene memory for the
slave units is overwritten. Cancels operation by selecting
No.
Scenes

Scene 1–8

Scene 1–8

Scene 1–8

Master 
XLR
Wireless
XLR+Wireless
Stand Alone 
No
Yes

No
Yes

.

Send Mode 
G3
G4s
Connect 
Link
Unlink
Send Mode 
G3
G4s
Connect

Link
Unlink
17