OPERATION METHOD
Installing the strainer
he mist blower is pro ided with the strainers at the solution tank opening and the
pipe inlet head.
Always make sure the strainer is installed in place.
o install the strainer, push it in place.
o remo e the strainer, pry it out o place.
WARNING:
ighten the tank cap rmly. ailure to tighten the tank cap may cause solution
leakage, pressure reduction and the like.
Adjusting the shoulder strap
Adjust the shoulder strap to a length that is com ortable to work while carrying the
mist blower.
Adjust as shown in the gure.
o tighten strap
Hip belt (optional accessory)
he hip belt optional accessory enables the operator to carry the appliance more
stably.
Adjusting the control handle
Mo e the control handle along the swi el pipe to the most com ortable position.
Filling the solution tank
1. Keep the gasket 1 in good condition and lubricated with grease and clean.
2. ut the mist blower on a at sur ace.
o loosen strap
17
(1)