Descargar Imprimir esta página

Dolmar AT3726A Manual De Instrucciones página 16

Ocultar thumbs Ver también para AT3726A:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92
Model AT3726L
Cutting tool
2-tooth blade
4-tooth blade
Nylon cutting head
Plastic blade
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
The vibration emission during actual use of the power tool can differ from the declared
WARNING:
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Keep distance at least 15 m.
15m(50
)
FT
Danger; be aware of thrown objects.
Caution; kickback
Wear a helmet, goggles and ear protection.
Wear safety glasses.
Wear ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Do not expose to moisture.
Left hand
2
a
(m/s
)
Uncertainty K
h,W
(m/s
2.5
2.5
2.5
2.5
Only for EU countries
Ni-MH
Li-ion
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
16 ENGLISH
Right hand
2
a
(m/s
)
h,W
2
)
1.5
2.5
1.5
2.5
1.5
2.5
1.5
2.5
Uncertainty K
2
(m/s
)
1.5
1.5
1.5
1.5

Publicidad

loading

Este manual también es adecuado para:

At3726l