Storage Instructions; Material Composition; Care Instructions - medi PT control Instrucciones De Uso

• Now put your leg into a 30-degree
angle flexion position and pull the
brace up over your leg (Image 1),
• Make sure that the kneecap is
positioned centrally in the space for
the patella. Position the brace so that
the middles of the hinges are level with
the upper border of the kneecap and
just behind the lateral centre line of
the leg (Image 2).
• Now close the straps in the following
order:
– Lower calf strap in the back
(Image 3).
– Lower thigh strap in the back
(Image 4).
– Patellar straps so that the kneecap is
guided from the outside to the inside
– please ensure that the patellar air
cushion is positioned to the side of
the kneecap and that it does not
push onto the kneecap from the
front (Image 5 + 6).
– Upper thigh strap in the back
(Image 7).
– Thigh strap in the front (Image 8).
– Calf strap in the front (Image 9).
• If possible, walk a few steps in order to
check that the brace is in the correct
position. Please adjust the position as
required (Image 10).

Care instructions

Please close the Velcro fasteners before
washing and remove the ortheses. Soap
residues, lotions and ointments can
cause skin irritation and material wear.
• Wash the product by hand, preferably
using medi clean washing agent.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
    

Storage instructions

Keep in a dry place at room temperature.
Protect from heat, direct sunlight and
moisture.

Material composition

Avional, polyamide, elasthane, PU
Warranty / contractual guarantee
Consistent with legal guidelines.
Disposal
The product can be disposed of in the
domestic waste.
Your medi team
wishes you a quick return to full fitness.
English