Publicidad
Idiomas disponibles
Idiomas disponibles
WASHING WATER FILTER CLEANING
MACHINE TRACKING ADJUSTMENT
ENGLISH
24
1.
2.
Ensure that the machine is off and the user key (52) has been removed.
3.
Close the washing water valve (A, Fig. 13). The valve is closed when it is in position (B) and it is open when it is in position (C).
4.
5.
Open the valve (A).
brush or the pad is used.
cleaning, adjust the handwheel (35) by turning it clockwise or counter-clockwise to correct this pull and obtain a generally neutral
straight-ahead movement.
Drive the machine on a level floor.
Remove the transparent cover (D) and the gasket (E), then remove the filter strainer (F). Wash and rinse them, then refit them
carefully onto the filter support (G).
The machine tracking (straight movement) may vary according to the type of floor to be cleaned and depending on whether the
If it is difficult to keep the machine moving straight as it tends to pull to the left or to the right with the brush deck lowered and during
INSTRUCTIONS FOR USE
SC500 - 9099980000
G
E
F
D
Figure 13
A
revised 07/2017
C
B
11/2014
P100852
Publicidad
