Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
MANUAL PURPOSE AND CONTENTS
TARGET
HOW TO KEEP THIS MANUAL
IDENTIFICATION DATA
OTHER REFERENCE MANUALS
SPARE PARTS AND MAINTENANCE
CHANGES AND IMPROVEMENTS
ENGLISH
2
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Advance in case of doubts concerning the interpretation of the instructions and for any further information.
from the non-observance of this prohibition.
The Instructions for use Manual must be kept near the machine, inside an adequate case, away from liquids and other substances
that can cause damage to it.
The machine serial number and model name are marked on the plate (4).
Year of production (Date code: A17 means January 2017) and model number are marked on the same plate.
Model .................................................................................................
Model Number ...................................................................................
Serial Number ....................................................................................
–
Electronic battery charger Manual, to be considered as integral part of this Manual
–
Spare Parts List (supplied with the machine)
–
Service Manual (that can be consulted at Advance Service Centers)
Centers. Only original spare parts and accessories must be used.
Contact Advance for service or to order spare parts and accessories, specifying the machine model name, model number and serial
number.
Advance constantly improves its products and reserves the right to make changes and improvements at its discretion without being
Any change and/or addition of accessories must be approved and performed by Advance.
Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact
This Manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. Advance will not be answerable for damages coming
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.
All necessary operating, maintenance and repair procedures must be performed by qualified personnel or by Advance Service
obliged to apply such benefits to the machines that were previously sold.
INSTRUCTIONS FOR USE
SC500 - 9099980000
revised 07/2017
11/2014
Publicidad
