EHEIM LOOP pro 26000 Manual De Instrucciones página 16

English
1. Turn the receptacle ① of the filter foam ② to the right (⌦G➊).
2. Pull the filter foam downwards, and out of the filter insert (⌦G➋).
3. Remove the filter foam from the receptacle.
4. Fit the new filter foam onto the receptacle.
5. Install the filter foam again in reverse order.
Clearing faults
DANGER! Electric shock!
▶ Before clearing faults, remove the mains plug.
Fault
Filter capacity decreases
For other faults, please contact EHEIM Service.
Technical data
LOOPpro
Type
Pump
UVC clarifier
Dimensions with UVC clarifier (L × W × H)
Water outlet
Media temperature
The technical data of the pump and the UVC clarifier are found in the associated operating manuals.
Decommissioning
Storing and overwintering
1. Clean the appliance
2. Store the appliance in a frost-proof place.
Disposal
When disposing of the appliance, pay attention to the relevant statutory regulations.
The appliance may no longer be disposed of with the municipal or household waste. The appliance will
be accepted free of charge at municipal collection points or recycling centres. The product packaging is
made up of recyclable materials. Dispose of them in an environmentally responsible manner and take
them for recycling.
Possible cause
Filters are soiled
Pump is soiled
18000
5217
FLOW5000
CLEARUVC-24
750 × 640 × 335 mm
16
Remedy
▶ Clean the filter
▶ Clean the filter housing of the
pump (see the instruction manual
of the pump)
26000
5218
FLOW6500
CLEARUVC-36
750 × 640 × 435 mm
Ø 75 mm
+4°C – +35°C
38000
5219
FLOW6500
CLEARUVC-60
750 × 640 × 435 mm