STAMOS S-MMA-100 MINI Manual De Instrucciones página 16

To ensure the long and reliable operation of the device, make sure to operate and maintain it properly
in accordance with the guidelines in this instruction manual. The technical data and specifications in
this manual are up-to-date. The manufacturer reserves the right to make changes in order to improve
the quality. Taking the technical progress and the possibility of reducing noise into account, the unit is
designed and built in such a way that risks resulting from noise emissions are reduced to the lowest
possible level.
4. Safety of use
CAUTION! Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury or death.
The term "device" or "product" in the warnings and in the description of the instructions refers to
MMA welding machine
4.1. General
• Take care of your own safety and the safety of bystanders by carefully reading and
following the instructions in the unit manual.
Only qualified personnel should be allowed to start up, use, service and repair the unit.
•
• Do not misuse the unit.
4.2. Guidelines for securing fire hazardous work
Preparing the building and rooms for fire hazardous works consists in:
cleaning the rooms or places where the work will be carried out of any flammable materials
•
and contamination;
moving all flammable and non-flammable objects in flammable packaging away to a safe
•
distance;
securing materials that cannot be removed, e.g. welding spatter, by covering them with
•
e.g. sheet metal, gypsum boards, etc;
• checking whether materials or objects susceptible to ignition in adjacent rooms do not
require local protection;
• sealing with non-combustible materials all installation and ventilation openings, etc., in the
vicinity of the work site;
• protecting electrical and gas cables with flammable insulation against welding splashes or
mechanical damage, if they are located within the risk range of fire hazardous work;
• make sure that painting or other work with flammable substances is not being carried out
at the location where the work is to be done.
Sparks may cause fires
Welding sparks can cause fires, explosions and burns to unprotected skin. Wear welding gloves and
protective clothing when welding. Remove or secure all flammable materials and substances from the
work area. Do not weld closed containers or tanks that have contained flammable liquids. Such
containers or tanks should be flushed before welding to remove flammable liquids. Do not weld near
flammable gases, vapors or liquids. Fire fighting equipment (fire blankets and powder or snow
extinguishers) should be located near the work area in a visible and easily accessible location.
CAREFULLY READ AND UNDERSTAND THIS MANUAL
BEFORE STARTING THE WORK.