Operating Position; Conduct In The Case Of Danger Or Accidents; Technical Data - Columbus RA 35 B 10 Manual De Instrucciones

If the persons concerned do not have the necessary knowledge, then training is required accordingly.
The responsibilities for operating and servicing the equipment must be clearly defined and adhered to, so that misunderstandings
which could affect safety are avoided.
The appliance may only be operated and maintained by people who can be expected to perform their work reliably.
Their approach to work must in no way endanger people, the environment or the equipment.
People under the influence of drugs, alcohol or medication which affects their reactions, are not allowed to work on or with the
appliance in any way.
When choosing personnel, the youth employment laws of the country concerned must be taken into account with regard to
minimum age requirements and any occupation-specific rules relating to this.
It is the responsibility of the operator to ensure that no unauthorized person works on or with the appliance.
Unauthorized persons, such as visitors, etc, may not handle the appliance. For security reasons they must be kept at an
appropriate distance.
It is the duty of the operator to report any changes in the way the appliance works, which could affect safety, immediately to the
person responsible..

1.8 Operating position

When cleaning floors, the operating position of the operator is behind the handle of the appliance. The appliance may only be
operated by one person at a time.

1.9 Conduct in the case of danger or accidents

Where there is danger or if an accident occurs, immediately stop the appliance by switching it off at the control panel and secure it
against rolling away (see Chapter "Operation").
Ensure that First-Aid equipment (first-aid box, eye lotion, etc.) and a fire extinguisher are available nearby.
Staff must be made aware of the procedures to be followed and location of safety equipment, alarm buttons, First-Aid boxes and
rescue equipment. This will ensure prompt action in the case of accidents or if dangers occur.

2 Technical data

Technical Data
Scrub path
Squeegee Width
coverage performance
Solution tank
Recovery tank
Brush diameter
Brush motor
Brush pressure
Working speed max.
Vacuum motor
Voltage
Battery
Weight
Dimensions
Protection class
Max.gradiant of operation
RA 35    B 10
mm 350
mm 420
m²/h 1260
L 10
L 12
mm 1xØ350
W 350
kg 26
m/min 60
W 250 / 2 stages
V 12
Ah5 63
kg 74 (44+20+10)
mm 735x490x625
IP 23
% 2
20
Automatic Scrubber
RA 35B, K 10
RA 35    K 10
350
420
1260
10
12
1xØ350
350
26
60
250 / 2 stages
230
/
54 (44+10)
735x490x625
24
2