Amprobe WT-50 Manual De Uso página 19

SECTION V: FIRE FIGHTING MEASURES
Flash Point: Not flammable
Special Fire Fighting Procedures: Wear self-contained breathing apparatus and
protective clothing to prevent contact with skin and clothing.
Unusual Fire & Explosion Hazards: Emits toxic fumes under fire conditions.
SECTION VI - EXPOSURE CONTROLS, PERSONAL PROTECTION
Evacuate area. Wear respirator, protective clothing, chemical safety goggles,
rubber boots and gloves when handling. Sweep up but avoid raising dust.
Collect in a bag and hold for waste disposal. Ventilate the area and wash spill
site after materials pick up is compete.
SECTION VII - HANDLING AND STORAGE
Handling: Wear respirator, protective clothing, chemical safety goggles, rubber
boots and gloves when handling.
Ventilate the operation room. Do not get in eyes, on skin, on clothing. Wash
thoroughly after handling.
Storage: Store in a cool dry place. Away from fire or moisture.
SECTION VIII - REACTIVITY DATA
Stability: Stable
Hazardous Polymerization: Will not occur
Materials To Avoid: Strong oxidizers, acids, and bromine trifluoride
DISCLAIMER
The above information is transferred to this format by Amprobe from the
Material Safety Data Sheet supplied by the manufacturer identified in Section
I. If you have any questions related to the material provided herein, contact
the manufacturer directly at the phone number given in Section I. Amprobe
does not, in any way, represent itself as an expert in the chemical described in
this MSDS and assume in liability for any incomplete or inaccurate information
contained herein.
13