Lenze E94APNE04 Serie Instrucciones Para El Montaje página 43

4.2 Arrangement of the devices
Fig.11-1
The technical data must be taken into account when planning and dimensioning a DC-bus
interconnection.
Arrange the devices as follows for operation in DC-bus interconnection via the DC busbars:
Mount the devices side by side from the left to the right.
ƒ
Install the supplying device on the left side:
ƒ
– DC power supply module (in a first row),
– DC feeding point (in following rows).
Install the Multi Drive axis controllers from left to right with decreasing powers.
ƒ
Single Drive axis controllers can be integrated to increase the braking power. These
ƒ
axis controllers must be equipped with the optional busbar set (E94AZJAxxx).
EDK94PNE36 DE/EN/FR/ES/IT 2.0
All manuals and user guides at all-guides.com
Mounting the installation backplane
Arrangement concept

Arrangement of the devices
4
SSP94PN200
43