Sagola MINI xtreme mix Manual De Instrucciones página 23

22/23
05. Components
1 Air nozzle
2 Trigger
3 Air inlet
4 Spring of needle
5 Spray width regulator
6 Spray gun filter
7 Tip
8 Product inlet
9 Security system
06. Warnings
Before and after each job, the spraygun must be locked with the safety system* in such a way
that the trigger is locked when the cap is fully closed (clockwise).
* Safety system incorporated in later versions dated 2019/04
Before putting the unit into operation, and especially after each cleaning and/or repair operation,
a check must be made that the gun components are securely tightened and that the air and/or
product hoses are airtight (no air leaks). Faulty parts must be replaced or repaired as appropriate.
The gun is easy to handle thanks to its design and the simplicity of its mechanisms. No special
training is required for handling the gun. Use the gun according to the operating, maintenance
and safety instructions indicated in this manual and follow the application methods indicated to
obtain the required quality of finish.
Before putting the unit into operation, we recommend you to clean the gun as this has been
subjected to functional tests and before packaging it is treated internally with a protective coating,
some of which may still remain. Apply thinner to eliminate this. Remove any residual grease
applied during assembly.
Ensure that the products to be applied are chemically compatible with the components these
come into contact with (Aluminium, stainless steel, polyamide, Tugsten carbide, PTFE and FKM).
Do not use corrosive or abrasive products.
The gun has been designed for long service and can be used with the majority of the products
available on the market. Its use with highly aggressive products will quickly increase the need for
maintenance and spares. If you need to apply special products, please contact SAGOLA S.A.U.
Read and apply all the information, instructions and safety measures indicated by the
manufacturer of the products to be applied (thinners, etc.) as these may provoke chemical
reactions, fires and/or explosions, or be toxic, irritant or harmful and in all cases dangerous for
the health and personal safety of the user and of other persons nearby (see chapter on Safety
and Health).
1
7
2
6
ENGLISH
5
9
4
3
8