Sagola MINI xtreme mix Manual De Instrucciones página 28

Recommended
Description
application
13 / 20
13 / 30
ACRYLIC
13 / 40
URETHANES
FONDS AND
13 / 50
PRIMERS
13 / 60
13 / 80
15 / 20
15 / 40
FONDS AND
15 / 50
PRIMERS
15 / 60
15 / 80
16 / 50
FONDS
18 / 40
ANTICORROSIVE
PRIMERS 18 / 60
HIGH VISCOSITY
21 / 40
PRODUCTS
21 / 80
Both the product contribution and the fan size in the pressure guns are directly related to the product pressure
set by the user, the product viscosity and the characteristics of the hose. Therefore, a reference value cannot be
established.
11. Maintenance
In order to carry out maintenance, repairs or cleaning, first disconnect the unit from the com-
pressed air distribution network.
Do not apply excessive force or inadequate tools for maintaining and cleaning the unit. Some
repairs must be done with special tools on some occasions.
In these cases, you must contact the Customer Service of SAGOLA. Any handling of this product
by non-authorised personnel would render the warranty null and void.
The unit must be overhauled on a periodic basis to check the status of its components and
replace these when they are not in perfect condition.
IN ORDER TO OBTAIN THE BEST POSSIBLE RESULTS, ALWAYS USE
ORIGINAL SPARES. ENSURE TOTAL INTERCHANGEABILITY, SAFETY AND
OPERATION.
11.1. Changing the self-adjusting Packing gland
The needle gaskets that form part of the packing gland are gun components that should be
replaced when malfunctions occur or when there is a loss of air tightness.
Nozzle
Spray
angle
(inchess / mm.)
0.013" / 0.33 20°
0.013" / 0.33 30°
0.013" / 0.33 40°
0.013" / 0.33 50°
0.013" / 0.33 60°
0.013" / 0.33 80°
0.015" / 0.38 20°
0.015" / 0.38 40°
0.015" / 0.38 50°
0.015" / 0.38 60°
0.015" / 0.38 80°
0.016" / 0.41 50°
0.018" / 0.46 40°
0.018" / 0.46 60°
0.021" / 0.53 40°
0.021" / 0.53 80°
ENGLISH
Spray width Water flow
at 100 bar
(at 30 cm.)
100-150 mm. 0.57 L/min.
150-200 mm. 0.57 L/min.
200-250 mm. 0.57 L/min.
250-300 mm. 0.57 L/min.
300-355 mm. 0.57 L/min.
405-457 mm. 0.57 L/min.
100-150 mm. 0.72 L/min.
200-250 mm. 0.72 L/min.
250-300 mm. 0.72 L/min.
300-355 mm. 0.72 L/min.
405-457 mm. 0.72 L/min.
250-300 mm. 0.91 L/min.
200-250 mm. 1.10 L/min.
300-355 mm. 1.10 L/min.
200-250 mm. 1.52 L/min.
405-457 mm. 1.52 L/min.