11.12 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1
Turn the glass cover to remove it.
Step 2
Remove the metal ring and clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Attach the metal ring to the glass cover and install it.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
The oven does not turn on or does not heat up
Possible cause
The oven is not connected to an electrical sup‐
ply or it is connected incorrectly.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if the oven is correctly connected to the
electrical supply.
TROUBLESHOOTING
Put a cloth on the bottom of
the cavity.
Remedy
Step 3
77/264