Franke FRSM 302 C TD BK Manual De Instalación Y Servicio página 8

ELECTRICAL CONNECTION
Prior to carrying out the electrical connection, please ensure that:
- the plant characteristics are such as to follow what is indicated on the
data plate placed at the bottom of the working area;
- that the plant is tted with an e cient earth connection, following
the standards and law provisions in force.
The earth connection is compulsory in terms of the law. Should there be
no cable and/or plug on the equipment, use suitable absorption material
for the working temperature as well, as indicated on the data plate.
If connecting directly to the mains power supply, t a multi-pole switch
of a suitable size for the rated capacity with a clearance distance which
completely disconnects the power line under overvoltage category III
conditions, consistently with the rules of installation (yellow/green earth
wire must not be interrupted).
The plug or omnipolar switch must be easily reached on the installed
equipment.
Under no circumstance must the cable reach a temperature above 0 °C
of the ambient temperature.
NOTE: Make sure the characteristics of your household electrical power
supply (voltage maximum output and current) are compatible with
those of your FRANKE hob.
OVERVIEW
FRSM 302 C T BK AUS
1. Cooktop
2. Control panel
THE POWER CABLE MUST ONLY BE REPLACED BY A QUALIFIED
ELECTRICIAN.
Fig. 3
1
2
– 8 –
N
L
230V
FRSM 302 C TD BK
PE
H05RR-F3x1.5
H05RN-F3x1.5
1
2