2.
Align the hole in the lower handle with the hole
in the upper handle, then insert the bolts from inside,
then attach washer B from outside, and then tighten the
thumb nuts.
► 1. Upper handle 2. Hole 3. Washer B 4. Thumb nut
5. Lower handle 6. Bolt
CAUTION:
Hold the upper handle firmly so
that it does not drop off your hand. Otherwise, the
handle may fall and cause an injury.
3.
Attach holder A and holder B to the handle.
Position the cords as shown in the figure.
1
2
► 1. Cord 2. Holder A 3. Holder B
NOTE: When attaching holder A, be sure to fix the
cord with the holder as shown in the figure.
1
6
2
3
5
4
3
Removing the mulching attachment
1.
Open the rear cover.
► 1. Rear cover
2.
Remove the mulching attachment while holding
down the lever.
2
► 1. Lever 2. Mulching attachment
Installing the grass basket
1.
Open the rear cover.
► 1. Rear cover
6 ENGLISH
1
1
1