REMOTE CONTROL
NOTE: PLEASE SET THE UNIT TO MODE -> ADDR, OTHERWISE
THE REMOTE CONTROL WILL NOT WORK
1. BRIGHTNESS & SPEED adjustment: Press
brightness and speed in programme mode
2. ON/OFF of the LEDs.
3. SELECT BASIC COLOR:
R: Red
G: Green
B: Blue
W: White
4. COLOUR BUTTONS: For constant lighting of one colour, press the
corresponding button.
5. SELECT AN INTERNAL PROGRAMME
FLASH: Colour change
STROBE: Colour strobe
FADE: Colour fade
CLEANING AND USING FREQUENCY OF PRODUCT
Please make sure that the light is power off before dismantling or maintaining, it's very important
to keep the light clean. Frequent cleaning will ensure maximum brightness output, but also prolong
the life time. It's suggested to use the high quality, professional glass detergent and soft cloth to
clean the light. It's not allowed to use alcohol or chemical solvent.
The front objective lens requires weekly cleaning as smoke-fluid tends to build up residues, thus
reducing the light output very quickly. The cooling fans should be cleaned monthly.
The inner part of the light should be cleaned by vacuum cleaner or an air-jet at least once a year.
Important! Check the air filters periodically and clean before they become clogged!
Clean the two air filters that are placed in the fixture's covers and two in the fixture's base. Use a
vacuum cleaner, compressed air or wash and dry them before they put them back.
After replacing the air filters, reset the elapsed time counter in the menu "Information" (Informa-
tion -> Air Filters -> Elapsed time.)
When the light doesn't work, please check if the fuse is burnt out or not. If it is, the same fuse
should be replaced, find out the faulty and restart the light. But please note the repair must be
handled by professional.
TECHNICAL SPECIFICATIONS
Power Supply .......................................................................................................................90-240V~50/60Hz
Consumption ............................................................................................................................................. 285W
Light source ...................................................................................................................... 28 x 10W RGBW LED
Dimensions ........................................................................................................................265 x 213 x 117mm
Weight ....................................................................................................................................................... 2.54kg
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
DESCRIPTION
• 28 LED 10W RGBW
• 13/29 canaux DMX
• Zoom linéaire électronique 12-60°
• CTB & CTO, réglage linéaire de la température de couleur de 2800-8000°K
or
MANUEL D'UTILISATION
www.afx-light.com
to set the
9
EN