Zenner zelsius C5-ISF Instrucciones De Instalación Y Funcionamiento página 23

the display switches back to "r. outlet"
after approx. 4 minutes, if the choice
hasn't been activated as described
below. After another approx. 4 minutes,
the meter programs itself automatically
to "r. outlet", if the push button hasn't
been operated meanwhile.
The selection is being activated with the
door symbol (top right of the display):
Press and hold the button.
■
The door icon disappears and ap-
■
pears after about 2 seconds again.
Then release the button immedi-
■
ately.
The selected setting is accepted and
the unit is configured for the chosen
place of installation. The chosen place
of installation can be checked in the
first display of level 3 ("r. outlet" or "v.
inlet").
The meter is now ready for operation.
Pulse inputs and outputs (optional)
By meters with pulse inputs, the pulse
value can be called up in the display
(see the display overview, level 4). The
pulse value of the outputs is perma-
nently set and corresponds with the
last position of the associated display
value.
Typical connection (*)
U = 3 ... 30 V
Imax = 20 mA*
white
yellow
green
brown
(*) The connection of the external resis-
tor could be necessary to ensure an
integrated current limiter.
Example:
Output 1 = energy output
Energy display = XXXXX.XXX
Last position = 0.001 MWh = 1 kWh
Output pulse = 1 kWh
Colour
white
yellow
green
brown
Technical data I/O
Load
Class acc. to
EN 1434-2
Cable
Pulse-duty
factor
Cable length
Input fre-
quency
M-Bus (optional)
The optional M-Bus interface complies
with standard EN 1434-3 resp. EN
13757-3 and operates with 2400 baud.
The two conductors can be connected
in any order to the M-Bus network.
A firmly attached cable is included, ex-
ternal wiring must be done by oneself.
Technical data M-Bus
Cable length
Cable
V Out
Colour
Pulse Pulse
brown
white
GND
Connec-
Signification
tion
I/O 1 In-/Output 1
I/O 2 In-/Output 2
I/O 3 In-/Output 3
Common ground
GND
for I/O 1-3
max. 30V DC/20 mA
Input: IB
Output: OB, OC
D = 3.8 mm, 4-wire
1:1 (out); 1:5 (in)
approx. 1.5 m
max. 1 Hz
1.5 m
D = 3.8 mm, 2-wire
Connec-
Signification
tion
M-Bus 1 M-Bus cable 1
M-Bus 2 M-Bus cable 2
23