cecotec SURFACE PRECISION 10400 Smart Healthy Vision Manual De Instrucciones página 31

ENGLISH
Note:
Weight L ≈ Weight R: Healthy
Weight L > Weight R or Weight L < Weight R: Pay attention to your balance status.
After body balance tracking, it will start measuring the body heart rate. The heart icon will flash
as the scale is weighing and analysing. Continue to stand on the scale until the measurement is
completed. Then, the App will receive all the data from the scale.
Click "More Data" to find details for weight, BMI, BMR, muscle, bone mass, etc.
Click "Charts" to check data comparison on Chart by week, month and year in vertical or
horizontal version by clicking on the top-right corner icon.
To add a new user or to switch between saved users, click on the photo
profile at the homepage's top-left corner or click "Account" and "Add User".
The device recognises the user by weight difference and reminds to change to the correct one.
Each account can support up to 24 users.
Baby weighing
To switch to the baby weighing mode click on "Baby Mode".
First, step on the scale (adult).
Once the scale has measured the adult's weight, step off the scale.
Finally, step on the scale while holding the baby. The App will automatically calculate the
baby's weight.
Img. 5.
The following error messages can appear on the display:
Lo: Low battery
Err: Overload
C: An error has occurred during measurement. Step off the scale and
step on it again to repeat the measuring process.
4. CLEANING AND MAINTENANCE
Never immerse the device in water or other liquids. No liquid must be allowed to enter the
device during cleaning.
Do not use any caustic or abrasive cleaning agents to clean the device. These can damage the
surface.
Clean the device with a slightly dampened, soft cloth and, if necessary, a mild cleaning agent.
When not in use, store the device in a dry, clean place which is protected from direct sunlight
and is out of the reach of children.
SURFACE PRECISION 10400 SMART HEALTHY VISION 31