Descargar Imprimir esta página

Makita EVH2000 Manual De Instrucciones página 14

Ocultar thumbs Ver también para EVH2000:

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
1. Start the engine (see page 12)
2. After starting the engine, mount the power sprayer on your back and adjust the shoulder straps so as to keep the unit as close to your body
as possible. Put the engine in idle and take care not to tilt the power sprayer unit too much.
Adjust straps as follows.
1) Loosening straps: ① Raise buckle
② Pull on the end of the strap attached to the power
sprayer.
2) Tightening straps: ③ Pull on the free end of the strap.
Note: If straps do not carry any weight, they can be tightened with relative
ease.
3. Select the desired opereting position the pressure dial.
4. Move the throttle lever at the desired position with the nozzle lever moved
while observing the spray.
When using the power sprayer always spray downwind. Take special care to avoid situations where sprayed chemicals are blown back
towards you.
LOW PRESSURE
PRESSURE DIAL
SLOW
CAUTION
14
Buckle
Tighten
Loosen
HIGH PRESSURE
FAST
Throttle lever
NOZZLE LEVER
OPEN
CLOSED

Publicidad

loading

Este manual también es adecuado para:

Evh2000g