universalblue UAS1906-21 Manual De Instrucciones página 56

Mounting plate
1. The wall for the installation of the indoor unit must be strong and
firm to prevent vibrations.
2.Use a crosshead screwdriver to fix the mounting panel,
horizontally mount the panel on the wall and make sure it is
correctly mounted, both horizontally and vertically.
3.Pull the mounting panel back after installation to confirm that it is
secure.
Make the hole in the wall
1. Drill a hole with an electric hammer or a drill in the predetermined
area to pass the pipe, it should be inclined outwards between 5º-
10º.
56