Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of the connection pipe
Connect the outdoor unit to the connection pipe according to the
following diagrams, making sure it is connected and tightened.
*If you want to lengthen the pipe, you must add an extra amount of
refrigerant so that the operation of the device is not compromised.
Notes: This table is for reference only.
Seals should not be reused.
After installation, check that the cover of the shut-off valve is
properly fixed.
Wiring connection
1.Loosen the screws and remove the cover from the electronic parts
of the unit.
61
Publicidad
