universalblue UAS1906-21 Manual De Instrucciones página 68

Press the TIMER button again to confirm the timer, then the ON/OFF
light will stop flashing.
If no button is pressed for 10 seconds during the timer setting, the
device will automatically exit that mode.
If a timer is already confirmed, pressing this button again will cancel
it.
Note: When a power-on timer is activated, all functions (except
SLEEP, DISPLAY and iFEEL) will be valid when the unit is turned on,
acting as a preset.
7-HEALTH/iCLEAN
This button has 2 functions:
a.HEALTH
Press this button with the unit on to activate health related
functions such as negative ion, electrostatic precipitation, PM2.5
removal, etc; depending on the configuration of each model.
Press this button again to deactivate the HEALTH function.
b.iCLEAN
By pressing the button with the unit turned off, the remote control
will show "CL" on the display and automatically start cleaning the
dust from the evaporator to increase cooling and heating efficiency.
The iCLEAN function lasts approximately 30 minutes, during which
time, if the unit is turned on with the remote control or by pressing
this button again, the iCLEAN function will be deactivated.
8- O
Each time you press the button , the temperature setting will
increase by 1°C and each time you press , it will decrease by
1°C, within a temperature range of 16°C to 32°C (60°F to 90°F).
68