universalblue UAS1906-21 Manual De Instrucciones página 59

Installation of the interconnecting cable
1.Open the panel, unscrew the screw on the cable cover and remove
it.
2.Pass the interconnecting cable through the wiring hole at the rear
and pull it out at the front.
3.Remove the cable clip, connect the interconnecting cable to the
wiring terminal according to wiring diagram, tighten the screw and
secure the interconnecting cable with the clip.
Note:
This manual includes the wiring for different types of air
conditioning. We cannot exclude the possibility that some types of
special wiring diagrams are not included.
The diagrams are for your reference only. If the wiring connections
are different from these diagrams, please refer to the wiring
diagram printed on the unit you purchased.
4.Replace the cable cover and screw it on.
5.Close the panel.
59