Publicidad
READ THESE INSTRUCTIONS CAREFULL Y AND
KEEP THEMFOR FUTURE CONSULTATION.
WARNING:TO REDUCETHE POSSIBLE RISH OF
FIRE.ELECTRICAL DISCHARGES OR PERSIONAL
INJURY，TAKETHE FOLLOWING INTO ACCOUNT:
1. Proceed with care. Read the instructions in full
before starting the installation.
2. WARNING! This fan can only be used with a
bipolar switch with a contact opening of 3mm.
3. T he installation process must only be carried out
by an authorized electrician.
4. The installation height, i.e. the distance between
the blades and the floor, should be at least 2.3
meters.
5. Make sure there are no obstacles within the area
of rotation.
6. Make sure the fan is securely attached to
the ceiling.
7. WARNING! Do not use a switch with a voltage
regulator to control the speed of the fan.
8. WARNING! T o avoid damage, make sure that
the blades are not bent over and that there are no
foreign objects within the area of rotation.
9. WARNING! If the fan is installed close to the
ceiling, the ceiling may not be lowered using rails in
accordance with European safety regulations. This
SAFETY INSTRUCTION
Publicidad
