Publicidad
Idiomas disponibles
Idiomas disponibles
1 - Welding current display
2 - Power light
3 - Welding current control knob
4 - Overheating indicator
5 - Cable socket (positive pole)
6 - Cable socket (negative pole)
7 - Power cord
8 - ON/OFF switch
7. Connecting the wires
1. Connect the ground cable to the connector marked with a "+" sign and twist the cable plug to
secure the connection.
2. Connect the welding gun cable to the connector marked with a "-" sign and twist the cable plug to
secure the connection.
Caution! Cable polarity may vary! All polarity information should be described on the packaging
provided by the electrode manufacturer!
3. Connect the power cord and turn on the power. After connecting the mass cable to the workpiece,
work can begin.
Publicidad
