Milwaukee WCE 30 Instrucciones De Uso página 7

Exchanging the
diamond cutting
discs
Disassembly
Assembly
ENGLISH
Always disconnect the plug from the socket before carrying out any work on the ma-
chine.
1. Loosen the screws and remove the protective cover.
2. Lock the work spindle by depressing the spindle lock. Open the round nut of the up-
per cutting disc with aid of a pin-type face spanner and remove it. Remove the upper
cutting disc.
3. Lock the work spindle by depressing the spindle lock. Remove the Spanntec-spindle
with aid of the Allen key and remove the back cutting disc.
Tension flange
1. Insert the tension flange.
2. Assemble the machine in reverse order.
Arrow on diamond cutting discs must agree with arrow on protective hood cover-di-
rection of rotation.
7
Spanntec-nut
Round nut with drilled holes
in one face
Spanntec-spindle
WCE 30