Makita XCU08 Manual De Instrucciones página 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Overall length (without guide bar)
Rated voltage
Net weight
Standard guide bar length
Recommended guide
bar length
Applicable saw chain type
(refer to the table below)
Standard sprocket
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are sub-
ject to change without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The light-
est and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges
may cause injury and/or fire.
with 90PX
with 91PX
Number of teeth
Pitch
XCU08
4.8 - 5.0 kg (10.5 - 11.0 lbs) 4.8 - 5.1 kg (10.6 - 11.1 lbs)
350 mm
(14")
(0 - 1,200 m/min)
(0 - 3,940 ft/min)
200 cm
2 ENGLISH
XCU09
270 mm
(10-5/8")
D.C. 36 V
400 mm
(16")
250 - 400 mm
(10" - 16")
250 - 400 mm
(10" - 16")
90PX
91PX
6
3/8"
0 - 20 m/s
3
(6.8 fl oz)