Kärcher T 7 Plus T-Racer Manual Del Usuario página 6

Installation of extension
tubes
Note
Make sure that the device parts are se-
curely connected during installation.
1. Attach the lower extension tube
(green marking) to the T-Racer.
a Completely unscrew the union
nut.
b Press the bayonet into the socket.
c Turn the lower extension tube
(green marking) 90° until it clicks
into place.
2. Tighten the union nut.
Repeat the procedure with upper ex-
tension tubes (yellow marking) if nec-
essary.
Operation
Note
Extension tubes can be used with any
Kärcher accessory.
Note
For an optimal cleaning result, do not
operate the high-pressure cleaner in
the eco setting.
6
Cleaning the floor area
Before use, remove coarse dirt from
the cleaning surface (e.g. by sweeping
it away) in order to avoid damage to the
T-Racer.
ATTENTION
Damage to the rotor arm
The rotor arm can be damaged if it hits
edges and corners.
Do not drive over free-standing corners
and edges.
ATTENTION
Do not use the T-Racer for scouring or
scrubbing.
ATTENTION
First check the effectiveness of the de-
vice in an inconspicuous place, espe-
cially on sensitive surfaces such as
wood.
ATTENTION
Do not stay in one place, always keep
the T-Racer moving.
English