Kärcher T 7 Plus T-Racer Manual Del Usuario página 9

Replacing the skids
Worn or damaged skids can easily be
replaced:
1. Use a suitable tool, such as a screw-
driver, to gently push the skid out up-
wards at the detent.
2. Pull the skid out upwards.
3. Press the new skid lightly into the
holder until it clicks into place.
Troubleshooting guide
High-pressure cleaner does not
build up pressure or pulsates
High-pressure nozzles clogged or
damaged.
1. Remove the high-pressure nozzles.
2. Check the high-pressure nozzles for
blockages and clean them if neces-
sary.
3. Check the high-pressure nozzles for
damage and replace if necessary.
4. Rinse the T-Racer without jets with
clear water.
5. Install the high-pressure nozzles.
Wrong high-pressure nozzle selected.
The device only achieves an optimal
cleaning result with the right high-pres-
sure nozzles!
1. Select high-pressure nozzles ac-
cording to the high-pressure cleaner
used.
2. Install high-pressure nozzles.
English 9