Setting the daily alarms
In time mode, press "SET" once shortly to change to alarm
mode.
In alarm mode, press and hold "SET" button for 3 seconds
until hour of the alarm time starts to flash. Use the "UP" and
"DOWN" buttons to set the hour.
Press "SET" button to confirm your setting, the minute of the
alarm time starts to flash. Use the "UP" and "DOWN" buttons
to set the minute.
Press "SET" button to confirm your setting and to end the
setting procedure.
Please note:
After 7 seconds without pressing any button the clock switches
automatically from setting mode to normal clock mode.
The alarm will sound for 2 minutes if you do not deactivate it by
pressing any button. In this case the alarm will be repeated
automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes
WS9125 Manual