Allmatic CT INVERTER AM Guia De Instalacion página 23

9 Tips for a successful installation
9.1 High speed movements
PROBLEM
•
The motor stops for the effort during the movements
•
It is easy to stop the automation during the movements
counteracting the movement
•
The gate moves slowly despite having set an high speed
•
The motor stops and the control unit shows FAULT on the
display or 10 seconds of fast blinking
9.1 Low speed movements (slowing down)
PROBLEM
•
The motor stops for the effort during the movements
•
It is easy to stop the automation during the movements
counteracting the movement
•
The gate moves slowly despite having set an high speed
9.3 Correct working
The correct setting of parameter is when you are not able to stop the automation when trying counteracting the movement.
The use of safety devices is absolutely necessary to ensure the safety of the automation.
6-1622596 rev.07 24/11/2022
•
Raise the torque supplied to the motor until problem is solved
High Torque OP, High Torque OP
•
Lower the speed of the motor until problem is solved
High Speed OP, High Speed CL
•
Lower the torque supplied to the motor until problem is solved High Tor-
que OP, High Torque OP
•
Lower the speed of the motor until problem is solved
High Speed OP, High Speed CL
•
Raise the torque supplied to the motor until problem is solved
Low Torque OP, Low Torque CL
•
Lower the speed of the motor until problem is solved
Low Speed OP, Low Speed CL
ITA ENG FRA ESP DEU POR
SOLUTION
SOLUTION
11 / 12