Pramac P2000i Manual Del Operador página 35

5.5 Muffler Screen and Spark Arrestor Maintenance
Should be performed every 6 months or 100 hours. The air filter may need to
be cleaned more frequently when using in unusually wet or dusty areas.
1. Remove the screws 1 and then remove the cover 2.
2. Loosen the bolt 1 and the remove the muffler cap 2, the muffler screen 3
and spark arrester 4.
3. Remove the carbon deposits on the muffler screen and spark arrester
using a wire brush. Use wire brush lightly to avoid damaging the muffler
screen or spark arrestor.
4. Check the muffler screen and spark arrester replace them if damaged.
5. Install the spark arrester.
6. Install the muffler cap.
7. Install the cover and tighten the screws.
INVERTER GENERATOR – P2000i
35