Pramac P2000i Manual Del Operador página 9

• Connect the ground lead of the machine to the ground terminal 1 to
ground the generator to earth (where needed) and connect the end to
the ground electrode buried in the ground.
CONNECTION NOTES
•
Avoid connecting the generator to commercial power outlet.
CONNECTION
WARNING
Before the generator can be connected to a building's electrical system, a licensed
electrician must install an isolation (transfer) switch in the building's main fuse box. The
switch is the connection point for generator power and allows selection of generator or
main line power to the building. This will prevent the generator from charging the main
power line (back feeding) when the main power supply has failed or has been turned off for
line repair. Back feeding can electrocute or injure line maintenance personnel. Also,
generator and building electrical system damage can occur when normal operating power
returns if unit is used without an isolation switch.
EXTENSION CORD NOTES
Extension cords should be protected by a tough flexible rubber sheath (I E C
245) or the equivalent to withstand mechanical stress.
INVERTER GENERATOR – P2000i
9